Imported from majiayu000/claude-skill-registry (skills/development/build-automation-davidorex-vcv-rack-module-crea/SKILL.md). Install upstream with npx skills add majiayu000/claude-skill-registry --skill build-automation-davidorex-vcv-rack-module-crea. Copyright stays with the author.

build-automation Skill

Purpose: Orchestrates VCV Rack module builds using Makefile-based build system with comprehensive failure handling.

Integration Points

This skill is invoked by:

• module-workflow: After each stage completion (Stages 2-6) to build and verify changes
• module-improve: After implementation changes to rebuild with modifications
• module-lifecycle: During installation verification to ensure modules are buildable

This skill invokes:

• Makefile: VCV Rack's standard Makefile-based build system
• troubleshooter agent: Deep research agent (via Task tool) when user chooses "Investigate" option

Build Workflow

When invoked, the build-automation skill follows this workflow:

1. Input Validation

• Verify module name provided
• Check module directory exists: test -d "modules/$MODULE_NAME"
• Validate Makefile present: test -f "modules/$MODULE_NAME/Makefile"
• Validate RACK_DIR environment variable is set

2. Determine Build Target

Context-aware target selection:

• Stage 2 (Foundation): Always use clean build to verify compilation (make clean && make)
• Stages 3-6 (Implementation Stages): Full build with dist target (make dist)
• module-improve: Full build with dist target (make dist)
• User manual invocation: Ask if they want specific target (clean, all, dist, install)

3. Validate RACK_DIR

# Check RACK_DIR is set
if [[ -z "$RACK_DIR" ]]; then
  echo "⚠️ RACK_DIR environment variable not set"
  echo ""
  echo "RACK_DIR must point to your VCV Rack SDK directory."
  echo ""
  echo "What would you like to do?"
  echo "1. Run /setup to configure environment"
  echo "2. Set RACK_DIR manually"
  echo "3. Exit"
  echo ""
  read -p "Choose (1-3): " choice

  case "$choice" in
    1)
      # Invoke system-setup skill
      exit 2  # Signal to orchestrator to run /setup
      ;;
    2)
      echo "Enter RACK_DIR path:"
      read -p "> " RACK_DIR_PATH
      export RACK_DIR="$RACK_DIR_PATH"
      ;;
    3)
      exit 1
      ;;
  esac
fi

# Verify RACK_DIR exists and contains SDK
if [[ ! -f "$RACK_DIR/include/rack.hpp" ]]; then
  echo "⚠️ RACK_DIR doesn't contain VCV Rack SDK"
  echo "Expected: $RACK_DIR/include/rack.hpp"
  echo ""
  echo "Run /setup to configure environment"
  exit 1
fi

4. Platform Detection

# Determine platform for build target
PLATFORM=$(uname -s)
ARCH=$(uname -m)

case "$PLATFORM" in
  Darwin)
    if [[ "$ARCH" == "arm64" ]]; then
      RACK_PLATFORM="mac-arm64"
    else
      RACK_PLATFORM="mac-x64"
    fi
    ;;
  Linux)
    RACK_PLATFORM="linux-x64"
    ;;
  MINGW*|MSYS*|CYGWIN*)
    RACK_PLATFORM="win-x64"
    ;;
  *)
    echo "Unknown platform: $PLATFORM"
    exit 1
    ;;
esac

echo "Building for platform: $RACK_PLATFORM"

5. Invoke Make

Execute build with appropriate target:

cd "modules/$MODULE_NAME"

# Create logs directory
mkdir -p "../../logs/$MODULE_NAME"
LOG_FILE="../../logs/$MODULE_NAME/build_$(date +%Y%m%d_%H%M%S).log"

# Run make with logging
make $BUILD_TARGET 2>&1 | tee "$LOG_FILE"
BUILD_EXIT_CODE=${PIPESTATUS[0]}

# Return to root directory
cd ../..

# Check exit code
if [[ $BUILD_EXIT_CODE -eq 0 ]]; then
  echo "✓ Build successful"
else
  echo "✗ Build failed (exit code: $BUILD_EXIT_CODE)"
fi

Build targets:

• make clean - Clean build artifacts
• make or make all - Compile module (creates plugin.so/.dylib/.dll)
• make dist - Create distributable plugin archive (.vcvplugin)
• make install - Copy plugin to VCV Rack plugins directory
• make clean all - Clean build from scratch

6. Monitor Build Output

• Capture stdout and stderr
• Display progress messages to user
• Watch for error indicators
• Track build duration

7. Capture Exit Code

Check build exit code:

• Exit 0: Build succeeded → proceed to Success Protocol
• Exit non-zero: Build failed → proceed to Failure Protocol

8. Log File Location

Always show log file path after build attempt:

Build log: logs/[ModuleName]/build_TIMESTAMP.log

User can review full build output from log file if needed.

Failure Protocol

When build fails (non-zero exit code), present this structured decision menu:

⚠️ Build failed

What would you like to do?
1. Investigate - Run troubleshooter agent to research the error (recommended)
2. Show me the build log - Display full build output for manual review
3. Show me the code - Open relevant source files where error occurred
4. Wait - I'll fix it manually and tell you to resume
5. Other

Choose (1-5): _

Option 1: Investigate (Recommended)

Purpose: Automated diagnosis using troubleshooter agent

Implementation:

1. Extract error from build log (last 50 lines or first error indicator)

2. Parse error for key information:

   • Error message (exact text)
   • File/line reference (if available)
   • Error type (Make error, compilation, linker, etc.)

3. Invoke troubleshooter agent via Task tool:

   Invoke troubleshooter agent to research this build error:
   
   Error: [extracted error message]
   Context: Building VCV Rack module "[ModuleName]" with Make
   VCV Rack SDK: [RACK_DIR path]
   Platform: [mac-arm64 | mac-x64 | linux-x64 | win-x64]
   File: [file path:line number if available]
   
   Please investigate using the graduated depth protocol and provide a structured report.

4. Wait for troubleshooter report (structured markdown)

5. Display report to user with findings and recommended solution

6. Ask: "Should I apply this solution?" (Yes/No/Modify)

   • Yes: Apply solution, then ask "Retry build now?"
   • No: Return to failure menu
   • Modify: Accept user modifications, then ask "Retry build now?"

IMPORTANT: NEVER auto-retry without explicit user confirmation.

Option 2: Show Build Log

Purpose: Display full build output for manual analysis

Implementation:

1. Read log file: logs/[ModuleName]/build_TIMESTAMP.log
2. Display last 100 lines (or full log if < 100 lines)
3. Format for readability (preserve colors if possible)
4. After display, re-present decision menu (iterative debugging)

Option 3: Show Code

Purpose: Display source files where error occurred

Implementation:

1. Parse build error for file/line reference
   • Make errors: Extract from Makefile references
   • Compilation errors: Extract from compiler output (e.g., "src/ModuleName.cpp:42")
   • Linker errors: Show relevant Makefile and header files
2. Read relevant source file using Read tool
3. Display file with context (±10 lines around error line if line number available)
4. If no file reference parseable: "Error location not found in build output. Try Option 2 (Show build log)."
5. After display, re-present decision menu (iterative debugging)

Option 4: Wait (Manual Fix)

Purpose: User will fix issue manually outside workflow

Implementation:

1. Display exit message:

   Pausing workflow. Please fix the issue manually.
   
   When ready to retry the build, say:
   - "resume build" or "retry build" - Retry build with same target
   - "continue workflow" - Skip build and continue to next stage (not recommended)
   
   Build log: logs/[ModuleName]/build_TIMESTAMP.log
   Module directory: modules/[ModuleName]/
   

2. Exit skill, return control to invoking skill/workflow

3. Await user continuation command

Option 5: Other

Purpose: Accept free-form user input for custom actions

Implementation:

1. Prompt: "What would you like to do?"
2. Accept free-text response
3. Interpret request and act accordingly:
   • Build-related: Execute custom build command
   • Code-related: Read/display requested files
   • Investigation: Perform custom research
   • Continue: Proceed as requested

Success Protocol

When build succeeds (exit code 0), follow this workflow:

1. Verify Success

• Confirm build exit code 0
• Check that expected artifacts were created
• Extract output locations from build log

Expected artifacts by target:

• make all: build/plugin.so (macOS), build/plugin.dll (Windows), build/plugin.so (Linux)
• make dist: dist/[ModuleName]-[version]-[platform].vcvplugin

2. Display Success Message

Use this template:

For Stage 2 (compilation verification):

✓ Build successful (compilation verified)

Module: [ModuleName]
Platform: [mac-arm64 | mac-x64 | linux-x64 | win-x64]
Output: build/plugin.[so|dylib|dll]

Build time: [duration]
Log: logs/[ModuleName]/build_TIMESTAMP.log

For full dist build (Stages 3-6, module-improve):

✓ Build successful

Module: [ModuleName]
Platform: [mac-arm64 | mac-x64 | linux-x64 | win-x64]
Plugin: dist/[ModuleName]-[version]-[platform].vcvplugin

Build time: [duration]
Log: logs/[ModuleName]/build_TIMESTAMP.log

Ready to install to VCV Rack.

3. Context-Aware Decision Menu

Present menu based on invoking context:

From Stage 2 (Foundation)

Foundation verified. What's next?
1. Continue to Stage 3 (Shell/Parameters)
2. Review generated code
3. Pause workflow

From Stage 3 (Shell)

Shell built successfully. What's next?
1. Continue to Stage 4 (DSP)
2. Test in VCV Rack now
3. Review parameter code
4. Pause workflow

From Stage 4 (DSP)

DSP built successfully. What's next?
1. Run manual tests (recommended)
2. Continue to Stage 5 (GUI)
3. Test in VCV Rack now
4. Pause workflow

From Stage 5 (GUI)

GUI built successfully. What's next?
1. Run manual tests (recommended)
2. Continue to Stage 6 (Validation)
3. Test in VCV Rack now
4. Pause workflow

From Stage 6 (Validation)

Module complete! What's next?
1. Test in VCV Rack (recommended)
2. Install to VCV Rack (/install-module)
3. Make improvements (/improve)

From module-improve

Update built successfully. What's next?
1. Test changes in VCV Rack
2. Continue improving
3. Done (commit changes)

4. Return to Invoking Skill

After user makes decision, return control to the skill that invoked build-automation:

• module-workflow: Returns to stage dispatcher to continue or pause
• module-improve: Returns to improvement workflow to continue or finalize
• Manual invocation: Exits skill, displays final status

IMPORTANT: Always return control to invoking skill after success. Don't continue workflow autonomously.

Integration Examples

Example 1: module-workflow Stage 2 (Foundation)

Scenario: foundation-agent completes, module-workflow needs to verify compilation

Invocation:

• Skill: module-workflow
• Stage: 2 (Foundation)
• Action: Invoke build-automation with clean build

Success Path:

1. build-automation invokes: make clean && make in modules/[ModuleName]/
2. Build succeeds (compilation verified)
3. Displays success message with artifact location
4. Presents Stage 2 completion menu
5. Returns to module-workflow with status: SUCCESS

Failure Path:

1. Build fails (likely missing includes or API misuse)
2. build-automation presents 4-option failure menu
3. User chooses "Investigate"
4. troubleshooter diagnoses: "Missing rack.hpp include"
5. User confirms: "Apply solution"
6. Source file updated to include rack.hpp
7. User confirms: "Retry build"
8. Build succeeds
9. Returns to module-workflow with status: SUCCESS

Example 2: module-workflow Stages 3-6 (Implementation Stages)

Scenario: dsp-agent completes Phase 4.2, module-workflow needs full dist build

Invocation:

• Skill: module-workflow
• Stage: 4 (DSP), Phase: 2
• Action: Invoke build-automation with dist target

Success Path:

1. build-automation invokes: make dist in modules/[ModuleName]/
2. Build succeeds, creates distributable plugin
3. Displays success message with .vcvplugin location
4. Presents Stage 4 completion menu: "Run manual tests / Continue to Stage 5 / Test in VCV Rack / Pause"
5. Returns to module-workflow with status: SUCCESS
6. module-workflow auto-invokes module-testing skill (if user chose "Run tests")

Failure Path:

1. Build fails (compilation error in DSP code)
2. Error: "modules/TestModule/src/TestModule.cpp:87: error: 'params' was not declared in this scope"
3. build-automation presents 4-option failure menu
4. User chooses "Show me the code"
5. Displays TestModule.cpp lines 77-97 with error highlighted
6. User sees issue: used 'params' instead of 'params[PARAM_ID]'
7. User says: "Wait" (will fix manually)
8. build-automation exits with: "When ready, say 'retry build'"
9. User fixes code manually
10. User says: "retry build"
11. module-workflow re-invokes build-automation
12. Build succeeds
13. Returns to module-workflow with status: SUCCESS

Example 3: module-improve (Bug Fix or Feature Addition)

Scenario: module-improve applies bug fix to existing module, needs to rebuild

Invocation:

• Skill: module-improve
• Phase: 5 (Build & Test)
• Action: Invoke build-automation with dist target

Success Path:

1. build-automation invokes: make dist in modules/[ModuleName]/
2. Build succeeds
3. Displays success message
4. Presents improvement completion menu: "Test changes / Continue improving / Done"
5. Returns to module-improve with status: SUCCESS
6. module-improve continues to Phase 6 (CHANGELOG update)

Failure Path:

1. Build fails (regression from bug fix)

2. Error: "modules/MyModule/src/MyModule.cpp:142: error: cannot convert 'int' to 'float' in assignment"

3. build-automation presents 4-option failure menu

4. User chooses "Investigate"

5. troubleshooter agent invoked:

   Error: cannot convert 'int' to 'float' in assignment
   Context: Building VCV Rack module "MyModule" after bug fix
   File: src/MyModule.cpp:142
   

6. troubleshooter returns report:

   ## Research Report: Type Conversion Error
   
   ### Problem Identified
   - **Error:** cannot convert 'int' to 'float' in assignment
   - **Context:** Line 142 attempts to assign integer result to float voltage output
   - **Root Cause:** Changed return type of helper function but didn't update assignment
   
   ### Research Path
   Level 0 (Quick Assessment)
   
   ### Confidence Assessment
   - **Confidence Level:** HIGH
   - **Reasoning:** Error message is explicit, solution straightforward
   
   ### Recommended Solution
   Cast result to float: `outputs[OUTPUT_ID].setVoltage(static_cast<float>(calculateValue()));`
   Or change calculateValue() return type to float.
   
   **Why This Works:** Explicit type conversion satisfies compiler type checker.
   

7. User reviews report: "Apply solution"

8. Code updated with cast

9. User confirms: "Retry build"

10. Build succeeds

11. Returns to module-improve with status: SUCCESS

Error Handling Rules

Never Auto-Retry

CRITICAL: build-automation must NEVER automatically retry a failed build without explicit user decision. Always present failure menu and await user choice.

Bad (DON'T DO):

Build failed. Retrying with different flags...

Good (DO THIS):

⚠️ Build failed

What would you like to do?
1. Investigate...

Preserve Context Between Retries

When user says "retry build" after manual fixes:

1. Use same build target as original build attempt
2. Preserve same invoking context (Stage 2, module-improve, etc.)
3. Return to same decision point after success/failure

Handle Missing Dependencies

If build fails with dependency errors (RACK_DIR not set, SDK not found):

1. Display specific missing dependency
2. Provide configuration command (e.g., "Run /setup to configure environment")
3. After user configures, offer: "Retry build now?"

Parse Errors Intelligently

Extract meaningful error information for troubleshooter:

• Make errors: Configuration issues, missing files, path problems
• Compilation errors: Syntax, type mismatches, missing declarations, API misuse
• Linker errors: Missing symbols, library issues
• RACK_DIR errors: SDK not found, wrong version

Pass full context to troubleshooter, not just error message.

Performance Considerations

Build Duration Tracking

Always display build duration in success/failure messages:

• Start timer before invoking make
• Stop timer after exit
• Format as "Build time: 2m 34s" or "Build time: 45s"

Log File Management

• Build logs accumulate in logs/[ModuleName]/
• Each build creates timestamped log: build_20251112_143022.log
• No automatic cleanup (user can manually delete old logs)
• Always reference most recent log file

Parallel Builds

Makefile can use parallel compilation:

# Use all available cores
make -j$(nproc)

# Or specify core count
make -j4

build-automation can pass -j flag to make for faster builds.

Common Build Issues

Issue: "RACK_DIR not set"

Cause: Environment variable missing

Solution: Run /setup to configure environment

Issue: "rack.hpp not found"

Cause: RACK_DIR points to wrong location or SDK not installed

Solution: Verify RACK_DIR points to VCV Rack SDK directory containing include/rack.hpp

Issue: "plugin.json not found"

Cause: Module directory structure incorrect

Solution: Verify plugin.json exists in module root

Issue: "Undefined symbols during linking"

Cause: Missing VCV Rack API symbols

Solution: Verify Makefile includes proper LDFLAGS from RACK_DIR

Issue: "Make command not found"

Cause: Make not installed

Solution: Install build tools (macOS: Xcode CLI tools, Linux: build-essential, Windows: MinGW)

VCV Rack-Specific Build Notes

Makefile Structure

VCV Rack modules use standardized Makefile:

# Standard Rack plugin Makefile

RACK_DIR ?= ../..  # Path to VCV Rack SDK
FLAGS +=
SOURCES += src/plugin.cpp
SOURCES += src/ModuleName.cpp
DISTRIBUTABLES += res

include $(RACK_DIR)/plugin.mk

Build Targets

• make clean - Remove build artifacts
• make dep - Build dependencies
• make - Compile module (default target)
• make dist - Create distributable .vcvplugin archive
• make install - Copy to VCV Rack plugins directory

Platform-Specific Output

• macOS: build/plugin.dylib
• Linux: build/plugin.so
• Windows: build/plugin.dll

Distributable Plugin

make dist creates platform-specific archive:

• Format: dist/[ModuleName]-[version]-[platform].vcvplugin
• Contents: ZIP archive containing plugin.json, plugin binary, and res/ folder
• Platform string: mac-arm64, mac-x64, linux-x64, win-x64

Testing & Debugging

Manual Invocation

Skill can be invoked manually for testing:

Please invoke the build-automation skill to build TestModule.

Context: Manual test of build system.
Expected: Full dist build.

Simulated Failures

To test failure protocol:

1. Introduce intentional syntax error in module source
2. Invoke build-automation
3. Verify 4-option menu appears
4. Test each option (Investigate, Show log, Show code, Wait)
5. Verify troubleshooter integration works
6. Fix error and retry
7. Verify success path works

Integration Testing

To test workflow integration:

1. Start new module workflow: /implement TestModule
2. Progress to Stage 2 (Foundation)
3. Verify build-automation invoked with clean build
4. Verify success returns to workflow
5. Progress to Stage 3+ and verify dist build invoked
6. Introduce failure and verify handling
7. Verify workflow resumes after fix

Skill Status: Ready for integration Last Updated: 2025-11-12 Dependencies: Makefile (per module), RACK_DIR environment, .claude/agents/troubleshooter.md