claude-skills-migrate-workflow-skill-b60b453554380c9d

Imported from tomevault-io/tomes (jetbrains--youtrackdb/skills/claude-skills-migrate-workflow-skill-b60b453554380c9d/SKILL.md). Install upstream with npx skills add tomevault-io/tomes --skill claude-skills-migrate-workflow-skill-b60b453554380c9d. Copyright stays with the author.

name: migrate-workflow description: Migrate a branch's docs/adr//_workflow/** artifacts by replaying workflow-format commits from the per-artifact stamp base through HEAD. Resumable across /clear. TRIGGER: branch has stale _workflow/ after a workflow-format change on develop. SKIP: branches with no _workflow/. Use when this capability is needed. metadata: author: JetBrains

Reading workflow files (TOC protocol)

When you Read any file under .claude/workflow/ or .claude/skills/, follow the protocol in conventions.md §1.8:

1. Read the TOC region: from <!--Document index start--> to <!--Document index end--> (read to the closing delimiter, not a fixed line count). If the file has no TOC region (a file whose only ## heading is this bootstrap block carries none, per §1.8(d)), read the file in full.
2. Match TOC rows where Roles contains any of your roles (or your role is any, or the row's Roles is any) AND Phases contains any of your phases (or your phase is any, or the row's Phases is any).
3. Use Read(offset, limit) to read only matched sections; if no row matches your role/phase, the file holds nothing for you — do not read further.

Your role: migrator. Your phase: any (migration sits outside the phase taxonomy).

Inline refs you find inside workflow files carry the same name:roles:phases suffix; apply file-level filtering before opening: a ref matches when any of your roles is in its roles and any of your phases is in its phases, your own any on either axis matches every ref on that axis, and a ref whose own roles or phases is any matches you. Backtick-wrapped refs carry no suffix; open or skip them at your discretion.

Auto-detection runs in /create-plan Step 1.5 and /execute-tracks startup via workflow-drift-check.md:orchestrator,planner:2,3A.

The skill runs inside the branch's own worktree. The branch is a self-contained capsule: workflow-format commits enter its view only when the user explicitly rebases or merges develop, so the migration's commit range is derived from per-artifact stamps and HEAD (see conventions.md §1.6), never from a develop-relative fork point. The skill applies each format-relevant commit's edits to the corresponding artifact files under the active plan's _workflow/.

The skill edits files in place and leaves the worktree dirty for the user to review and commit. No automatic commits.

Inputs

$ARGUMENTS — optional. When supplied, it must equal the current branch name (git branch --show-current); the migration always runs in the current worktree on the current branch. Step 1 enforces the equality and rejects mismatches.

Step 0 — Create progress tracker

Before any other tool call, create one task per step below using TaskCreate. Mark each in_progress when starting, completed when done. This list is the checklist; do not skip entries.

1. Preflight: verify clean tree under the active plan's _workflow/ and resolve the active plan dir
2. Bootstrap unstamped artifacts: prompt for a base SHA covering any unstamped _workflow/** artifact
3. Compute commit range + format-relevant commit list
4. Load or initialize progress file
5. Per-commit migration loop (one task per commit will be added at the start of Step 4, after Step 3 trims the resume queue)
6. Final stamp-to-HEAD batch
7. Final summary
8. Self-improvement reflection: invoke .claude/workflow/self-improvement-reflection.md with session-type=migrate-workflow

Step 1 — Preflight

Run these checks in order. Halt on any failure.

Argument check. When $ARGUMENTS is non-empty, it must equal the current branch name. The single equality covers every legacy reject case — refs/heads/..., origin/..., a 7- to 40-character hex SHA, or a non-existent branch name all fail this check, since none of them can equal git branch --show-current's plain-branch-name output:

if [ -n "$ARGUMENTS" ] \
   && [ "$ARGUMENTS" != "$(git branch --show-current)" ]; then
  echo "ERROR: \$ARGUMENTS ($ARGUMENTS) does not match the current branch ($(git branch --show-current))"
  exit 1
fi

Active-plan-dir resolution. Enumerate docs/adr/*/_workflow/ directories in the current worktree:

ls -d docs/adr/*/_workflow/ 2>/dev/null

Apply this ladder and capture the result as $PLAN_DIR (the parent directory, without the trailing /_workflow/):

1. Zero matches — halt with "no _workflow/ directory on the current branch; nothing to migrate".
2. Exactly one match — use it. The parent directory name need not match the current branch; branch names and ADR directory names are not guaranteed to match.
3. More than one match — list them and ask the user which one to migrate. One plan at a time.

Subsequent steps reference $PLAN_DIR (e.g., $PLAN_DIR/_workflow/implementation-plan.md) instead of re-running the ladder.

Narrow-scope dirty check. Refuse to start when any tracked file under the active plan's §1.6(h) artifact paths has uncommitted changes (working tree or index), or when any untracked file lives there. The scope covers the implementation plan, the design files, and every track file under $PLAN_DIR/_workflow/plan/. The staged subtree at $PLAN_DIR/_workflow/staged-workflow/ is deliberately outside the check: on workflow-modifying branches, in-flight workflow-document changes accumulate under that subtree during execution (Phase 4 then promotes them to the live paths in one commit), and a whole-subtree check would refuse every such session with staged content present — the dogfood path this skill accepts.

DIRTY=$(git status --porcelain -- \
  "$PLAN_DIR/_workflow/implementation-plan.md" \
  "$PLAN_DIR/_workflow/design.md" \
  "$PLAN_DIR/_workflow/design-mechanics.md" \
  "$PLAN_DIR/_workflow/plan/" \
  | grep -v '^?? \.migration-progress$')

if [ -n "$DIRTY" ]; then
  echo "ERROR: uncommitted or untracked changes under the active plan's _workflow/ artifacts:"
  printf '%s\n' "$DIRTY"
  echo "Commit, stash, or remove these files before re-running /migrate-workflow."
  exit 1
fi

The .migration-progress sentinel (Step 3) is the only carve-out; it is allowed to be untracked or modified mid-session. Any tracked file under the narrow scope showing a non-? status (modified, added, deleted, renamed, etc.) or any untracked file showing ?? halts the session with the offending paths printed; the user must commit, stash, or remove them before re-invoking.

The check is deliberately narrow. The dropped develop-side whole-tree check incidentally guarded the live skill file (.claude/skills/migrate-workflow/SKILL.md); the staging convention for workflow-modifying branches (in-flight rewrites land under staged-workflow/ rather than the live paths) now keeps the live skill at develop's state throughout execution, so the migration always reads the develop-state skill regardless of staged rewrites — the side-effect protection is no longer needed.

Step 2.0 — Bootstrap unstamped artifacts

Run the startup script in migrate-range mode and read the unstamped_files array it reports. The script owns the conventions.md §1.6(h) artifact walk and the stamp classification; the skill reads the result instead of re-deriving the walk in prose. The one migrate-range invocation here also produces the stamped_artifacts / base_sha / log_range / merge_base_failed fields Step 2 consumes, so the same JSON file feeds both steps.

.claude/scripts/workflow-startup-precheck.sh --mode migrate-range \
  > /tmp/claude-migrate-range-$PPID.json

If the script exits non-zero (it emits no JSON on a usage or flag error, exit 2), surface the stderr diagnostic and halt the migration; do not Read the /tmp file, which on a failed invocation holds stale or empty content. The script's stdout is the JSON; redirect it to a /tmp file rather than capturing it into the conversation. The migrate-range.log_range array is intentionally uncapped, because the migration must replay every workflow-touching commit, unlike the drift gate's head -10 display cap. A long branch range could otherwise dump an unbounded commit list into context on every invocation. Read the file with the Read tool's offset / limit so the uncapped log_range never lands in context whole; read unstamped_files here, and read the range fields in Step 2 in bounded slices.

The migrate-range JSON shape (cite the live shipped .claude/scripts/workflow-startup-precheck.sh emit_json migrate-range branch, which is authoritative over any frozen design text):

{
  "stamped_artifacts": [{"file": "<path>", "sha": "<40-hex>"}, ...],
  "unstamped_files": ["<path>", ...],
  "base_sha": "<40-hex>" | null,
  "log_range": [{"sha": "<40-hex>", "subject": "<commit subject>"}, ...],
  "merge_base_failed": [{"base": "<40-hex>", "sha": "<40-hex>", "files": ["<path>", ...]}, ...]
}

unstamped_files is the set of _workflow/** artifacts the script found with no parseable line-1 stamp — exactly the classification this step needs. $PLAN_DIR is documentary here (resolved in Step 1); the script resolves the active plan dir from the branch the same way.

When unstamped_files is empty. No prompt fires. Continue to Step 2 (which reads the same JSON file for the range fields).

When unstamped_files is non-empty. Print the list of unstamped artifacts and ask the user once for a base SHA covering the set. The prompt must include the rationale below so the user understands why the migration cannot guess:

The artifacts listed above carry no <!-- workflow-sha: ... --> stamp on line 1, so the migration has no anchor for "what workflow version was this artifact last synced to." An auto-computed default (the branch's fork-point with develop, git merge-base origin/develop HEAD, HEAD itself, or any other variant) would shift forward whenever the branch is rebased onto a newer develop and silently mark unstamped artifacts as already-current, skipping the migration. Provide the SHA of the workflow-format commit these artifacts were last synced to; a short prefix or the full 40-char form are both accepted.

Validate the response with the two-subcommand check from conventions.md §1.6(d). The ^{commit} peel rejects tag and ref names; only commit SHAs pass. The reachability check enforces the range's upper-bound rule from §1.6(c) (HEAD is the comparison anchor, so the bootstrap SHA must be reachable from HEAD).

The validation block below runs inside a retry loop bounded at three attempts. On either subcommand failure, print the cause, increment the attempt counter, and re-prompt the user with the same artifact list. On the third rejection halt the session with ERROR: three rejected attempts; bootstrap aborted and exit with no edits applied; do not fall through to Step 2:

if ! CANON_SHA="$(git rev-parse --verify "$SHA^{commit}" 2>&1)"; then
    echo "ERROR: $SHA is not a valid commit SHA: $CANON_SHA"
    # increment attempt counter, re-enter the prompt; see retry policy below
elif ! git merge-base --is-ancestor "$CANON_SHA" HEAD 2>/dev/null; then
    echo "ERROR: $SHA ($CANON_SHA) is not reachable from HEAD."
    # increment attempt counter, re-enter the prompt; see retry policy below
else
    USER_BOOTSTRAP_SHA="$CANON_SHA"
fi

Store the canonical 40-char rev-parse stdout ($CANON_SHA), not the user's raw input, as $USER_BOOTSTRAP_SHA. The canonicalization happens here, in the agent-side §1.6(d) git rev-parse --verify / git merge-base --is-ancestor check above; the script does no validation of its own --bootstrap-sha value (the arg parser folds it into git merge-base raw). The canonical form is mandatory on two counts: Step 4's per-commit lockstep advance writes the value into artifact stamps, and the stamp regex [0-9a-f]{40} in §1.6(a1) rejects shorter values on subsequent parse, so a short-prefix stamp would fail every drift-check re-read.

Retry policy (bounded, session-bound counter). On validation failure (either subcommand returns non-zero), print the failure cause and re-prompt the user with the same artifact list. Cap the retry count at three attempts per conventions.md §1.6(d); after the third rejection print a one-line diagnostic naming the current HEAD SHA (echo "Reachability is checked against git rev-parse HEAD = $(git rev-parse HEAD); if the SHA you supplied is on a different branch, check out the migration branch first."), then halt the session with ERROR: three rejected attempts; bootstrap aborted and exit with no edits applied. The user /clears the session to abandon the migration.

The counter is session-bound: it lives in the conversation, not on disk. The orchestrator holds the counter across both Step 2.0's initial prompt and Step 2's recovery re-prompt; the bash blocks above run once per attempt, and the orchestrator decides whether to re-invoke them. A /clear between attempts resets it. Step 3's .migration-progress file does not exist yet at Step 2.0 time, so no persistent counter is available; the bound is by design soft against /clear-based abandonment and re-entry. This matches §1.6(d)'s explicit "/clears the session to abandon the migration" exit shape.

The prompt records the user's best guess; the per-commit replay loop's halt-on-ambiguity in Step 4 is a partial safety net, not a guarantee. A too-old SHA silently bloats the replay range; a too-new SHA silently skips needed migrations. Both failure modes are documented in conventions.md §1.6(d) so debug sessions have a starting point.

Step 2 re-invokes the script with --bootstrap-sha $USER_BOOTSTRAP_SHA (when set) so the script folds the bootstrap SHA into the range alongside the stamped artifacts. When Step 2.0 did not fire (because unstamped_files was empty), $USER_BOOTSTRAP_SHA stays unset and Step 2 reads the range fields straight from the JSON file this step already produced, with no re-invocation.

Step 2 — Compute commit range

The range comes from the script's migrate-range output, not from a re-derived walk in this skill. The script owns both the conventions.md §1.6(h) artifact walk and the git merge-base fold that collapses the stamp set to base_sha (the oldest stamp reachable from HEAD per conventions.md §1.6(c)), then emits the path-scoped git log base_sha..HEAD range as log_range. The skill reads those fields and drives the conversational recovery the script cannot — the script never prompts.

Step 2.0 already produced the migrate-range JSON at /tmp/claude-migrate-range-$PPID.json. Read the range fields from the same file with the Read tool's offset / limit so the uncapped log_range array never lands in context whole (WB1): read base_sha and merge_base_failed first (both bounded), and read log_range in bounded slices when building the per-commit queue. The fields this step consumes:

• base_sha — the folded BASE_SHA (full %H SHA), or JSON null when the fold produced no clean base (no stamps and no --bootstrap-sha, or one or more merge-base failures).
• log_range — [{sha, subject}, ...] for base_sha..HEAD over the workflow pathspecs, oldest first; the empty array when there is no clean base or the range is empty. Uncapped by design.
• merge_base_failed — [{base, sha, files}, ...], one entry per failing merge-base pair, with files already naming the artifact paths that emitted the failing SHAs (the script resolves them via its STAMPED_PAIRS table). The empty array on a clean fold.
• stamped_artifacts / unstamped_files — the classification Step 2.0 consumed; available here too if a recovery re-prompt needs the current stamped set.

Halt — no stampable artifacts. When both stamped_artifacts and unstamped_files are empty, the active plan has no stampable artifacts on disk (a freshly-created _workflow/ dir holding only a transient handoff-*.md, for example). Per conventions.md §1.6(h)'s both-arrays-empty rule, halt the migration with no artifacts to migrate and exit without computing a range.

Merge-base failure recovery. When merge_base_failed is non-empty, the script's fold hit a merge-base failure: a stamp pointing at a git-gc-pruned commit, or two stamps with no reachable common ancestor in the local repo. The script collects every failing pair into merge_base_failed (the continue fold mode) rather than stopping at the first, so one recovery re-prompt covers the full failing set; the break-shape the drift gate uses would re-prompt once per failing pair serially. Each entry's files array already names the artifact paths that emitted the failing SHAs, so the skill does not re-resolve SHAs to paths — it reads them straight from merge_base_failed[].files.

Drive the recovery agent-side (the script cannot prompt):

1. Re-prompt the combined set. Route the union of the originally-unstamped files (unstamped_files) and every merge_base_failed[].files entry back through Step 2.0's bootstrap prompt per conventions.md §1.6(c). The user supplies one new SHA covering the combined set; the validated value replaces the prior $USER_BOOTSTRAP_SHA (the variable stays singular, matching conventions.md §1.6(d)'s one-SHA-per-prompt shape). The re-prompt's user-facing text uses the combined file list.

2. Drop the failed SHAs. Pass one --exclude-sha <sha> per merge_base_failed[].sha on the re-invoke alongside --bootstrap-sha "$USER_BOOTSTRAP_SHA". The repeatable --exclude-sha flag drops those stamps from the script's fold input, so the restarted fold does not re-run git merge-base over the same failing pair and fail again at the same point; the fresh bootstrap SHA anchors the excluded artifacts' range (matching the "treat as unstamped" framing in conventions.md §1.6(c)). Without the exclusion the restarted fold would re-walk the same failing stamp and exhaust the 3-attempt cap on input the user cannot fix.

3. Enforce the session-wide 3-attempt cap. The 3-attempt counter is shared across Step 2.0's initial prompt and this recovery prompt — session-wide, not per-prompt — so a user cannot chain failures across both prompts to escape the bound. A user who already burned 2 attempts in Step 2.0's initial run has 1 attempt left here. On three rejections (across any combination of initial + recovery attempts) the migration halts with ERROR: three rejected attempts; bootstrap aborted and exits with no edits applied.

4. Re-invoke and restart the fold. On a validated SHA, re-invoke the script with the fresh bootstrap SHA and one --exclude-sha per merge_base_failed[].sha, then re-read the JSON file, restarting the fold from the top:

   .claude/scripts/workflow-startup-precheck.sh --mode migrate-range \
     --bootstrap-sha "$USER_BOOTSTRAP_SHA" \
     --exclude-sha "$FAILED_SHA_1" --exclude-sha "$FAILED_SHA_2" \
     > /tmp/claude-migrate-range-$PPID.json

   Supply one --exclude-sha flag per merge_base_failed[].sha. If the script exits non-zero (it emits no JSON on a usage or flag error, exit 2), surface the stderr diagnostic and halt the migration; do not Read the /tmp file, which on a failed invocation holds stale or empty content. Otherwise re-read merge_base_failed from the refreshed file. If it is still non-empty (a different pair failed, or the bootstrap SHA itself does not reach the stamps), restart the recovery loop — still under the shared 3-attempt cap. When it is empty, continue to the range computation below.

Range computation and the empty-log halt. Once the script reports a non-null base_sha with an empty merge_base_failed, the range is log_range. If log_range is empty, halt with:

No workflow-touching commits between stamp base <short-base_sha> and HEAD <short-HEAD>. Nothing to migrate.

The empty-log halt fires on a fully-stamped branch whose stamps already point at HEAD (or at every workflow-touching commit between them and HEAD): the fold collapses to a stamp that is itself the newest workflow-format commit reachable from HEAD, so the range is empty and the migration has nothing to replay.

Otherwise, record base_sha and the log_range commit list (read in bounded slices via Read offset/limit, never inlined whole). Both values are referenced in the progress file and the final summary. Do NOT call TaskCreate per commit here; per-commit tasks are added at the start of Step 4, after Step 3 has trimmed the resume queue, so the task list never drifts from the actual queue.

Step 3 — Load or initialize progress file

The progress file lives at the worktree root, not inside _workflow/:

.migration-progress

Placing it at the worktree root keeps it outside any tracked subtree, so it does not interfere with the _workflow/ review diff and git status only surfaces it as a single untracked sentinel (the .migration-progress carve-out in Step 1's narrow-scope clean check filters it out).

Step 1 has already resolved the active plan directory as $PLAN_DIR; Step 4.4 edits files under $PLAN_DIR/_workflow/. No second enumeration is needed.

Progress file format:

# migrate-workflow progress
# range_start=<BASE_SHA> range_end=<HEAD-sha-at-skill-start>
# renames:
#   <old-path> -> <new-path>
<sha>	<classification>	<subject>
<sha>	<classification>	<subject>

• Header lines: # migrate-workflow progress, # range_start=... range_end=..., and a # renames: block. range_start is the BASE_SHA produced by Step 2's stamp-walking fold (the oldest ancestor reachable from every fold input); range_end is git rev-parse HEAD captured at skill start — together they pin the commit range Step 4 replays. The renames block starts empty; rename-classified commits (Step 4.6) append one indented # <old> -> <new> line per recorded rename. Step 4.4 consults this block when resolving paths for later commits.
• Body lines: one tab-separated record per migrated commit. Classification is one of format, skill, rename, noop (canonical short-names from Step 4.3). Step 5 reads these to produce per-classification counts.

File-existence handling:

• If the file does not exist, create it with the three header lines and an empty body. The file is a sentinel that the user removes after committing the migration. Do not modify .gitignore.
• If the file exists, read its header and apply this check:
  • If range_start=<recorded-sha> differs from the freshly-computed BASE_SHA (Step 2's fold output for this session), halt and ask the user to delete the stale progress file before re-running. The branch's stamp set has shifted since the prior session (new stamps landed, an earlier stamp was rewritten, or the branch was rebased), and the recorded body refers to a range that no longer matches the current artifact state. Warn that the worktree may carry partial edits from the prior run; recommend git stash (or commit-then-revert) before deleting the progress file.
  • If range_start matches but the recorded range_end differs from git rev-parse HEAD at this session's start, the branch has advanced since the prior session. Step 2's freshly-computed git log $BASE_SHA..HEAD already covers any commits added after the prior run; Step 4's queue is the new log minus the commits already recorded in the body. Update the progress file's range_end field to current HEAD before entering Step 4.
• The commits already listed in the body are done. Skip them in Step 4.

Step 4 — Per-commit migration loop

On first entry to Step 4:

1. Mark Step 0's umbrella task 5 ("Per-commit migration loop") as in_progress.
2. For each commit remaining in the trimmed queue (i.e., the Step-2 list minus the commits already recorded in .migration-progress), call TaskCreate with Migrate commit <short-sha> <subject>. These are the per-commit tasks consumed by 4.7.

Then iterate. For each commit in the queue, in order:

4.1 Context check (mandatory before starting the commit)

cat /tmp/claude-code-context-usage-$PPID.txt 2>/dev/null || echo "ctx: unknown"

The level= word in that output is authoritative — branch on it directly. The numeric band behind each level lives in .claude/workflow/workflow.md § Context Consumption Check; do not restate it here.

If the level is warning or critical:

1. Do NOT start the next commit.
2. Report progress to the user: which commits are done, which is next, where the progress file lives.
3. Instruct: "Context window is at . Run /clear and re-invoke /migrate-workflow to resume — already-migrated commits will be skipped via the progress file. If you /clear between 4.4 and 4.5, the next session re-replays this commit's edits over already-edited content; run git diff before re-invoking."
4. End the session.

Reflection at Step 6 is deliberately skipped on this early-exit path to protect the already-tight context budget; the next session's reflection at Step 6 (once the migration completes successfully) reports this halt as friction.

If info: continue, but delegate to sub-agents for any commit whose git show --stat <sha> shows either (a) more than 5 files touched under .claude/workflow/, .claude/skills/, or .claude/agents/, or (b) total changed lines greater than 500. The trigger is derivable from git show --stat before the full diff is read into orchestrator context, so the delegation decision itself does not burn context.

Sub-agent contracts. The orchestrator must interpolate $ARGUMENTS and per-commit values into the sub-agent prompt before launch; sub-agents inherit no conversation context and operate against the current worktree.

• Explore — diff reading.
  • Input: commit SHA and list of files to inspect under the active plan's _workflow/.
  • Output: bullet list of (file, intent-of-change) pairs. No source quotes longer than 5 lines.
• general-purpose — batched edits.
  • Input: absolute paths under the active plan's _workflow/, plus exact find→replace pairs or a section-insertion template.
  • Output: list of files edited and the line count changed per file.

This is a docs-only migration: sub-agents should use git show, Read, and Grep; mcp-steroid PSI is not required.

If safe: continue normally. The ctx: unknown fallback (file missing or $PPID resolution failed) is treated as safe — the file is best-effort, not load-bearing.

4.2 Read the commit

git show --stat <sha>
git show <sha> -- .claude/workflow .claude/skills .claude/agents
git log -1 --format='%B' <sha>

The commit message is load-bearing: it states the intent of the format change. Read it first, then the diff.

4.3 Classify the commit

First, detect path renames as a side concern (independent of the classification chosen below):

git show --diff-filter=R --name-status <sha> -- .claude/workflow .claude/skills .claude/agents

For each R<percentage>\t<old>\t<new> entry, plan to append one # <old> -> <new> line under the # renames: header in Step 4.6. The renames block is populated regardless of which classification wins, so later commits can follow path mappings.

Then classify the commit into one canonical short-name. Apply the predicates in order; the first match wins:

1. format — the commit modifies .claude/workflow/*.md (rules, conventions, prompts) or .claude/agents/*.md (agent definitions), or makes substantive (non-typo, non-rename-only) edits to .claude/skills/*/SKILL.md bodies. Produces migration edits in Step 4.4.
2. skill — the commit adds or removes a .claude/skills/*/SKILL.md file with no .claude/workflow/ or .claude/agents/ changes. Promote to format iff the new or changed SKILL body contains either (a) a reference to _workflow/, docs/adr/*/, or a per-branch artifact filename (e.g., implementation-plan.md, design-mutations.md, tracks/); or (b) a MANDATORY / required / must statement creating a new mandatory artifact. Otherwise stay skill; no edits in Step 4.4.
3. rename — the commit's diff under .claude/workflow/, .claude/skills/, and .claude/agents/ consists exclusively of file renames (no content changes beyond the rename detection threshold). The rename block was populated above; no further edits.
4. noop — comment-only, whitespace, or single-line typo or wording fixes that do not rename sections, add or remove required fields, or change conventions. Skip 4.4.

Before invoking any edit tool, print one line to the user in the form commit <short-sha>: <classification> — <reason> (e.g., commit 1de3cb0e: format — adds Phase-2 review section to implementation-plan.md).

Stamp-format-change halt. If the commit's diff modifies conventions.md §1.6 stamp-format definition (the workflow-sha: regex shape or the line-1 stamp position rule), halt and route the commit to manual review — the in-place migration cannot self-bootstrap a stamp-format change because the writer's old_string-match contract assumes the prior format's text shape. Record the commit at 4.6 with classification manual-review-needed and skip the per-commit edits in 4.4.

A fifth classification value, manual-review-needed, may be set in Step 4.6 only when the user invokes the "skip" escape from a Step 4.4 ambiguity halt, or when 4.3's stamp-format-change halt fires above. It is not selected here in 4.3 as a primary classification.

4.4 Apply the migration

For Format change commits, identify which files under the active plan's _workflow/** (or .claude/** if the branch carries local workflow overrides) match the format being changed. Use Read and Bash (git ls-files "$PLAN_DIR/_workflow/") to find them.

When the diff references a path that may have been renamed earlier in the branch's history, consult the # renames: header block in .migration-progress and follow any <old> -> <new> mappings recorded by prior rename-classified commits.

Apply edits with the Edit tool against absolute paths under the active plan's _workflow/. The migration mutates the current worktree in place; there is no separate source-of-truth worktree.

Common migration patterns to expect (not exhaustive; read the actual diff):

• A required section was added to implementation-plan.md: add the section with a [ ] placeholder to the branch's plan.
• A section was renamed (e.g., ## Plan Review → ## Plan Review (Phase 2)): rename it in every matching file under the branch's _workflow/.
• The step-file schema gained a new field (## Description, ## Base commit): add it if missing.
• A glossary term was renamed: global find-replace in the branch's plan and step files, then re-read each touched file to confirm context fits.
• A commit-message convention changed: record the change for the user. Do NOT rewrite past commits.
• A new mandatory artifact appeared (e.g., design-mutations.md): create it empty with a header.

Halt the loop and ask the user only if one of these three concrete conditions holds:

• (a) The diff renames a section but the new section name already exists in the branch's artifact (cannot rename onto an existing name without losing content).
• (b) The diff deletes a section that contains user-authored content (non-template wording) in the branch's artifact (the deletion would discard data).
• (c) The diff adds a required field whose value cannot be inferred from existing content in the branch's artifact (no safe default).

If none of these holds, apply the edit mechanically and continue.

Halt resume contract. When the halt fires, include this warning in the question: "If you /clear or interrupt before resolving, this commit will be replayed on resume. Run git diff first to detect duplicate edits." (Same crash-window contract as Step 4.6.)

User outcomes:

1. User supplies a translation — apply the edit per their guidance. Proceed to 4.6 and record the commit with its original classification (typically format).
2. User says "skip" — apply no edit. Proceed to 4.6 and record the commit with classification manual-review-needed. Step 5 surfaces the count so the user knows which commits to revisit manually.

4.5 Advance stamps in lockstep

After sub-step 4.4's edits land and before sub-step 4.6 records the commit in .migration-progress, rewrite line 1 of every artifact enumerated by conventions.md §1.6(h)'s canonical walk under the active plan's _workflow/ to <!-- workflow-sha: <current-commit-sha> -->. The order is load-bearing: edits → advance → progress sentinel, never another order. Reversing edits and advance, or deferring the advance past the progress sentinel, breaks crash resume — see design.md §"Per-commit replay and lockstep advance" for the case analysis. The design.md sequence diagram in §"Migration replay loop" is the authoritative ordering; §"Per-commit replay and lockstep advance" carries the crash-window analysis.

For each stamped artifact, use the Edit tool against line 1 with the prior stamp as old_string and the new <!-- workflow-sha: <current-commit-sha> --> as new_string. For the K-th commit in the queue (K ≥ 2), the prior stamp is the SHA 4.5 wrote on its previous iteration. Re-read head -1 "$f" at the start of each 4.5 fire to capture the current PREV_SHA; do not reuse the session-start stamp value. For K=1, PREV_SHA is the artifact's line-1 stamp at session start (Step 2's stamped set), or the bootstrap SHA after 4.5's unstamped-artifact branch ran for the artifact. The exact-string match makes the writer idempotent on equal SHAs (re-running on an artifact already at this commit's SHA: the prior stamp text is no longer present, so Edit raises an old_string mismatch — treat this as a benign no-op, do not retry and do not halt, because the post-condition <!-- workflow-sha: <current-commit-sha> --> on line 1 already holds) and portable across platforms (no sed -i BSD/GNU dialect difference).

Artifacts that were not stamped at session start gain their first stamp here as a side effect. At 4.5 invocation time, an artifact takes this bootstrap branch iff head -1 "$f" does not start with <!-- workflow-sha:; the $UNSTAMPED_FILES set Step 2.0 computed is informational (it drives Step 5's count summary), so do not rely on its membership at 4.5 — re-check per artifact. For files on the bootstrap branch, the Edit writer has no prior stamp to match. Use Read to capture the full file content, prepend a new line <!-- workflow-sha: <current-commit-sha> -->\n above the existing line 1, then Write the entire concatenated content back to the same path. After the first successful per-commit replay these artifacts join the stamped set and the standard Edit path applies on subsequent commits. A crash between Read and Write on this path leaves the artifact unstamped (the on-disk content is identical to its pre-4.5 state). The next session re-enters Step 2.0 with the same $UNSTAMPED_FILES set, re-prompts for the bootstrap SHA, and 4.5's bootstrap branch fires again on this artifact for the same commit — idempotent under the user supplying the same SHA.

This sub-step is the crash-resume marker: the next session reads any stamp, finds the last successfully-replayed SHA, and resumes at the next commit. See design.md §"Migration replay loop" for the sequence diagram and §"Per-commit replay and lockstep advance" for the crash-window analysis.

4.6 Update the progress file

Append one tab-separated line to the body of .migration-progress at the worktree root:

<sha>	<classification>	<subject>

<classification> is the canonical short-name from Step 4.3 (format, skill, rename, or noop), or the special value manual-review-needed when the user invoked "skip" from a Step 4.4 ambiguity halt.

For rename-classified commits, also insert one indented # <old-path> -> <new-path> line under the # renames: header (one line per rename recorded by the commit) so later commits can follow the mapping. For manual-review-needed, skip the renames update and apply no edits; the body line alone is enough to keep the commit out of the replay queue on the next run.

Mechanism: read the file with Read, mutate the contents in memory (append the body line and, for renames, insert the header line(s) under # renames:), then write the full file back with Write. Do not use Edit here; the initial file may have no trailing newline, so the old_string-based path is unreliable. Do not stage or commit the file; it lives outside git history.

If the process is killed between applying edits in 4.4 and updating .migration-progress here, the next run will replay the same commit. After a crash, run git diff before resuming to detect duplicate edits.

4.7 Mark the per-commit task completed

TaskUpdate the matching task to completed. Move to the next commit. When the queue is exhausted, mark Step 0's umbrella task 5 ("Per-commit migration loop") as completed before falling through to sub-step 4.8.

4.8 Final stamp-to-HEAD batch

Mark Step 0's umbrella task 6 ("Final stamp-to-HEAD batch") as in_progress. After the per-commit loop exits (the queue is exhausted) and before Step 5's final summary runs, re-stamp every artifact present on disk to git rev-parse HEAD. This sub-step lands invariant I2: at session end, every stamped artifact's line-1 SHA equals HEAD's SHA.

Capture HEAD once via git rev-parse HEAD into $HEAD_SHA. Then walk every artifact under $PLAN_DIR/_workflow/** per conventions.md §1.6(h)'s enumeration; for each artifact, read the current line-1 stamp (head -1 "$f") and call Edit with that value as old_string and <!-- workflow-sha: $HEAD_SHA --> as new_string. Artifacts already at HEAD (their prior 4.5 fire already wrote this SHA) fail the old_string precondition — treat the mismatch as a benign no-op (the post-condition already holds), do not retry, do not halt. Optional artifacts absent from disk (design-mechanics.md on branches that never crossed the length trigger) are silently skipped by §1.6(h)'s ls 2>/dev/null shape.

Re-stamp every artifact in the walk, including artifacts whose stamp the per-commit advance in sub-step 4.5 already updated to a SHA inside the range. A re-stamp that does change content covers two cases — an artifact whose last per-commit advance landed at a non-HEAD SHA inside the range (because no later replayed commit touched its file shape), and an artifact whose first stamp arrived through 4.5's unstamped-artifact bootstrap branch at a pre-HEAD SHA.

The final batch and the per-commit advance use the same Edit-against-line-1 writer, so the recovery story is uniform: a killed-mid-4.8 session leaves some artifacts at HEAD_SHA and the rest at the prior per-commit advance SHA, which the next /migrate-workflow session reads as non-uniform stamps. Step 2.0's fold collapses to the lowest, range derivation re-queues the not-yet-stamped commits (an empty range when every commit has already been replayed), and 4.8 fires again to land I2.

After the walk exits, mark Step 0's umbrella task 6 as completed.

Step 5 — Final summary

Mark Step 0's umbrella task 7 ("Final summary") as in_progress. $HEAD_SHA is the value sub-step 4.8 captured via git rev-parse HEAD; re-derive it here by running git rev-parse HEAD again — the value is unchanged since 4.8. $USER_BOOTSTRAP_SHA was captured at Step 2.0; if it is no longer in conversation state, recover it by reading line 1 of any artifact in $UNSTAMPED_FILES (the bootstrap branch stamped them at this value during the first commit's 4.5 fire). If Step 2.0 did not run this session (no unstamped artifacts), omit the bootstrap-count summary line entirely.

Output:

• Workflow stamps now at $HEAD_SHA (the value sub-step 4.8 captured from git rev-parse HEAD). This is the post-condition I2 lands; surfacing it in the summary gives the user a one-glance confirmation that every artifact in the active plan reached the same SHA.
• When $USER_BOOTSTRAP_SHA is set (Step 2.0 fired because the session started with at least one unstamped artifact), emit: "Bootstrapped N previously unstamped artifacts using SHA $USER_BOOTSTRAP_SHA", where N is the size of the $UNSTAMPED_FILES set Step 2.0 collected. Skip this line entirely when $USER_BOOTSTRAP_SHA is unset (fully-stamped session) so the summary stays terse on the common path.
• Count of commits migrated, of each classification (format, skill, rename, noop, manual-review-needed). Compute by reading the body of .migration-progress and counting each value of column 2.
• If any commits were recorded as manual-review-needed, list their short-SHA and subject so the user knows which to revisit manually.
• Total files edited in the branch's worktree, excluding the progress-file sentinel: git status --porcelain | grep -v '^?? \.migration-progress$' | wc -l.
• One-line next-step prompt: "Review the diff in this worktree, then commit + push when satisfied. Delete .migration-progress after the commit."

After printing the summary lines above, mark Step 0's umbrella task 7 as completed. Then proceed to Step 6.

Step 6 — Self-improvement reflection

Mark Step 0's umbrella task 8 (Self-improvement reflection) as in_progress, then mark umbrella task 8 as completed before invoking the reflection protocol. The flip is intentional: self-improvement-reflection.md ends the session at its final "End the session" step and never returns control here, so any post-invoke completion line is unreachable. Treating the umbrella task as "I am about to invoke reflection" (not "reflection completed") keeps the user's task list consistent even though the reflection itself runs after the flip. Then invoke .claude/workflow/self-improvement-reflection.md with session-type=migrate-workflow (see self-improvement-reflection.md §"What counts as a worth-recording issue" for the migration-shaped friction examples). The protocol owns its own YouTrack MCP-reachability check and end-of-session contract; nothing else fires after it returns.

Notes

• The skill edits artifacts in the branch's own worktree and never commits on the user's behalf; the user reviews the diff and commits + pushes after the session ends.
• For large diffs, delegate to Explore to summarize commit diffs and general-purpose to apply repetitive edits across many files; pass absolute paths inside the branch's worktree.
• This is a docs-only migration; mcp-steroid IDE control adds no value here.
• Re-invoking the skill on the same branch is safe: commits already recorded in .migration-progress are skipped. To force a full re-run, delete the progress file.

Source: JetBrains/youtrackdb — distributed by TomeVault.